Taper Maker Hardware & Plan

What You'll Receive

• PDF Plan and Cut List (US Standard & Metric)
• Measured Drawings
• A SketchUp Model
• Hardware Kit including all of the main hardware components. The only hardware you need to supply are 4 small screws for attaching the runner and the stop and optional rubberized cork
• Pre-printed patterns as well as a printable digital pattern set in case you make a mistake

What You'll Need

• A half sheet of 1/2" plywood (you can use 3/4" plywood for the base if you want)
• About 2 BF of solid wood (milled to just over 3/8" thick)
• Tools: Table Saw, Planer, Drill Press, Bandsaw, Sander, Router with an edge guide
• Bits: 1/4" router bit, 7/16" drill bit, 5/8" forstner bit, 3/8" drill bit
• If you want to add rubberized cork for additional grip, you can purchase this stuff.

Instructions